How Do I Make My Sub-Bass Deeper?

Try a different pattern that works with your track. Have the main frequency (the frequency that defines your sound or the one with most ‘energy’) of your sub-bass hit between 40-60 Hz. Make your kick hit about an octave higher, around 120 Hz. That way it won’t interfere with your bass too much.

How do I make my sub-bass sound deeper?

For deep bass, you’re going to want to use a low-pass filter to cut out the higher frequencies of the bass notes, and then shape it with the filter and amplitude envelopes. Using the low-pass filter cutoff, we cut the higher frequencies out. Next, played with the filter resonance to add some depth and color.

How do I make sub-bass more audible?

5 Secrets to Making Your Sub-Bass Notes Audible

  1. Double the Bass Line with Another Instrument.
  2. Bring Out the Midrange.
  3. Bring Out the Distortion.
  4. Slide into Higher Notes.
  5. Add Oscillation to Give the Bass an Audible Rhythm.
See also  What Is Controlled Bass?

Is it better to bridge your subs?

it won’t matter which way you wire it. It would be slightly better to bridge even though the power is not increased. There are some minor sq issues that can be eliminated running multiple subs mono instead of stereo.

How do I get huge bass?

5 Ways to Get a Bigger Bass for Your Mixes

  1. Start At The Source. For all the production tricks you can use to fatten up your bass, nothing beats actually starting with a really big bass sound.
  2. Keep It Centred.
  3. Tighten Up Your Monitors.
  4. Understand Compression.

What level should sub-bass be?

Subbass should be peaking at -12dB, so you keep enough headroom for the rest of the song. If mixing with headroom is not working for you, a general rule of thumb is to keep the subbass lower than the kickdrum by about 2 to 5 dB.

See also  What'S The Difference Between A Bass And A Double Bass?

What note should sub-bass be?

The best keys for Sub-Bass (The Power Zone)
For example, notes between F0-A0 in the sub-bass range are a good balance between good subwoofer reproduction and audibility. In other words, you feel it AND hear it. This is why many songs featuring heavy bass are typically in F Minor, F# Minor or G Minor.

What Hz is best for bass?

The best Hz for bass is between 60-250 Hz, as recommended by professionals. These ranges protect speakers from damage and ensure optimal safety and listening experience for you. Listening to bass at too low a frequency outside of this range can damage hearing.

Should you compress your sub-bass?

Compression will reduce the gain of your signal, by squeezing the high amplitude & low amplitude peaks of your audio together. This will reduce the dynamic range of your audio & can make things sound thicker. With sub bass, compression is a great tool make your sub bass ring more consistently & have more impact.

See also  Can You Use A Bass For Melody?

What does bridging a sub do?

Bridging amplifier channels combines a stereo pair of channels into a single mono output channel. Bridging is often used to provide more power to large full range speakers in a two channel system or home theater, or to power larger passive in room/in wall subwoofer speakers.

Can you run 2 subs on a mono amp?

This setup is perfect for a mono sub amp. By wiring the two subs in parallel (see the diagram) you’ll show a 2-ohm impedance to the amp. Mono amps are built for just this kind of situation, so you’ll get maximum power output from your amp investment.

Can you hook up two amps to one subwoofer?

A single voice coil sub won’t work with the two amps and will result in the outputs being fried as soon as you turn it on. A dual voice sub and the same amps can be done, but it needs to be effectively balanced. However, two amps one sub is definitely possible.

See also  What Color Plastic Worm Is Best For Bass?

Should kick be louder than bass?

The bass should be loud enough that the low end is big and powerful, but not so loud that it overpowers the kick drum. Remember to check your reference mixes often to make sure you’re staying on course. Once you have the bass level where you want it, don’t be afraid to adjust some of the other faders as well.

What key is best for sub-bass?

Key is important
G is, for me personally, the best key to write in for good sub-bass, but generally anything from F to A works well. C is a particularly difficult key to produce sub-bass in, but as always there are exceptions to the rule. Use a spectrum analyser to see where your bass is peaking.

See also  Can You Play Metal On Bass?

Can humans hear sub-bass?

Sub-bass sounds are the deep, low-register pitches below approximately 70 Hz (C♯2 in scientific pitch notation) and extending downward to include the lowest frequency humans can hear, approximately 20 Hz (E).

What subwoofer has the deepest bass?

10 Best Car Subwoofers for DEEP Bass

  • Rockford Fosgate T3S2-19 19″ Subwoofer.
  • Kicker CompC 10 Inch.
  • MTX Audio Terminator TNE212D Dual 12″ Subwoofers.
  • Rockford Fosgate P300-12 Subwoofer.
  • JL Audio 10TW3-D4 10″ Shallow Mount Subwoofer.
  • Rockville RW10CA Low Profile 10″ Subwoofer.

Is 40hz enough for subwoofer?

below 40 hz? yes, quite necessary. below 30 is where it gets less important. 30-45ish would be what most would consider real subbass….you may not hear it with a standard computer speaker setup, but you roll off anything below 50, there will be something noticeably missing on the dancefloor.

Should you high pass sub bass?

Another thing relating to having a good sub is being careful with highpass-filtering the song. It’s OK to highpass the signal around 25–40Hz, but go for mellow slopes such as 12 dB per octave. In SPAN, you should always see something even in the very lowest region.

See also  What Is The Best Size Spinner For Trout?

Should I compress bass and kick together?

Should you compress the bass and kick together? Compressing your bass and kick together is a good idea because it can help to glue your low end together. It’s also a great idea to use multiband compression when mixing your bass and kick so that you have more control over the compression.