Chemical Oxygen Demand (COD) analysis is a measurement of the oxygen-depletion capacity of a water sample contaminated with organic waste matter. Specifically, it measures the equivalent amount of oxygen required to chemically oxidize organic compounds in water.
What is the principle of COD?
The principle behind the COD testing method is that, under acidic conditions, a strong oxidising agent will oxidise almost any organic compound to carbon dioxide. COD analysis will measure the equivalent amount of oxygen that is required to chemically oxidise organic compounds in water.
What is COD and how it is determined?
Introduction: Chemical oxygen demand (COD) is used to determine the quantity of pollution in. water after wastewater treatment. The higher value of chemical oxygen demand indicates the. higher organic pollution in the water sample. Only chemically digest able matter can be determined.
What is COD and its importance?
COD is a water quality measure used not only to determine the amount of biologically active substances such as bacteria but also biologically inactive organic matter in water [8]. It is an important and rapidly measured variable for characterizing water bodies, sewage, industrial wastes, and treatment plant effluents.
What is COD test?
Chemical Oxygen Demand (COD) is a test that measures the amount of oxygen required to chemically oxidize the organic material and inorganic nutrients, such as Ammonia or Nitrate, present in water.
What are the sources of COD?
Sources of COD in stormwater are varied. However, soluble organic compounds are most likely to contribute to escalated COD concentrations. Residual food waste from bottles and cans, antifreeze, emulsified oils are all high in COD and are common sources of COD for industrial stormwater.
What is the value of COD?
The COD value indicates the amount of oxygen which is needed for the oxidation of all organic substances in water in mg/l or g/m3. The COD (Chemical Oxygen Demand) is closely related to the laboratory standard method named Dichromate-Method.
What is the objective of COD test?
The chemical oxygen demand (COD) is a measure of water and wastewater quality. The COD test is often used to monitor water treatment plant efficiency. This test is based on the fact that a strong oxidizing agent, under acidic conditions, can fully oxidize almost any organic compound to carbon dioxide.
What is COD in simple words?
COD is the oxygen demand that is consumed by both inorganic and organic matter present in the wastewater sample. The chemical oxygen demand is expressed as the mass of oxygen consumed over the volume of the solution. Its SI unit is milligrams per liter (mg/l).
Why COD is important in water treatment?
Chemical oxygen demand (COD) is the amount of dissolved oxygen that must be present in water to oxidize chemical organic materials, like petroleum. COD is used to gauge the short-term impact wastewater effluents will have on the oxygen levels of receiving waters.
What is COD reagent?
The most general COD determination uses potassium dichromate (K2Cr2O7) in excess in an acidic medium with the aid of silver sulfate (Ag2SO4) as a catalyst, and mercuric sulfate (HgSO4) added to remove interference of chlorides.
What is COD limit?
The chemical oxygen demand (COD) concentration in a treated effluent, if observed to be persistently greater than 250 mg/l before disposal to any receiving body (public sewer, land for irrigation, inland surface water and marine coastal areas), such industrial units are required to identify chemicals causing the same.
What is a good COD level?
Greenfield CET Plant Pvt. Ltd. According to standards of Central Pollution Control Board, permissible value of BOD is 30 mg/l and COD is 250 mg/l.
What is COD and BOD of water?
The biochemical oxygen demand (BOD) represents the amount of dissolved oxygen (DO) consumed by biological organisms when they decompose organic matter in water. The chemical oxygen demand (COD) is the amount of oxygen consumed when the water sample is chemically oxidised.
What is the full form of COD?
Cash on delivery (COD) is a type of transaction where the recipient pays for a good at the time of delivery rather than using credit. The terms and accepted forms of payment vary according to the payment provisions of the purchase agreement.
Which indicator is used in COD test?
potassium dichromate
Using potassium dichromate
. Most commonly, a 0.25 N solution of potassium dichromate is used for COD determination, although for samples with COD below 50 mg/L, a lower concentration of potassium dichromate is preferred.
How do you make COD standard solution?
Preparation of a COD standard solution:
Dissolve 0.851 g of potassium hydrogen phthalate in a calibrated or conformity-checked 100-ml volumetric flask and make up to the mark with dilution solution. The stock solution prepared according to this procedure has a concentration of 10 000 mg/l COD and 20 g/l Cl–.
What are the factors that affect COD?
The results reveal that three factors, i.e., water inflow concentration, gate opening size, and gate opening number, are the dominant factors of influence, and there are logarithmic relationships between the rate of change in COD concentration in the SCRRs and these factors.
What is a COD example?
The definition of a cod is a fish in the family Gadidae with low fat and a mild flavor. An example of a cod is the fish used to make cod liver oil.
Justin Shelton is a professional cook. He’s been in the industry for over 10 years, and he loves nothing more than creating delicious dishes for others to enjoy. Justin has worked in some of the best kitchens in the country, and he’s always looking for new challenges and ways to improve his craft. When he’s not cooking, Justin enjoys spending time with his wife and son. He loves exploring new restaurants and trying out different cuisines.