So are P basses good for metal? If you are looking for an old-school heavy metal sound, the P bass is a great choice. For bassists who are looking for a versatile bass that can handle various forms of metal, the P bass will in all likelihood feel too one-dimensional.
Which Fender bass is best for metal?
1. Fender Steve Harris Precision Bass. Perfect choice for metal, high-quality bass. It’s hard to imagine a list without a Fender bass.
Can you play metal on a Jazz bass?
mostly for the neck, but also the sound. The growl of the jazz bass is perfect for metal!
What is P bass used for?
The P-Bass was the first to feature a bass guitar with frets delivering precision and accuracy to bass playing. The Precision bass first started with a single-coil pickup and was then modified to a split-coil pickup in the middle position.
What bass is used in metal?
Heavy metal bass is the use of the bass guitar (also called “electric bass”) in the rock music genres of heavy metal and hard rock. The bassist is part of the rhythm section in a heavy metal band, along with the drummer, rhythm guitarist and, in some bands, a keyboard player.
Do you need 5 string bass for metal?
As a general rule, you do not need a 5-string bass to play metal and for most genres of metal, a 4-string is sufficient. In sub-genres that utilize deeper tunings, many bassists opt for a 5-string as it has more range and flexibility than the 4-string.
What bass did Cliff Burton use?
Rickenbacker 4001
The bass of choice for the late Cliff – a trademark of his that’s visually striking, like a Les Paul in Slash’s hands. This bass was heard and used on countless records and was replace by only one model, as per Cliff’s decision: his custom-made Aria Pro II.
How do I make my bass sound like metal?
Getting a great metal bass tone consists of a mix of proper distortion, amp EQ, effects, and aggressive playing. This collection should create a ‘gritty,’ ‘clanky,’ and ‘aggressive’ sound. Also, the bass needs to find its own sonic space in a band mix to compliment the heavy guitar sounds.
Is a Jazz bass good for punk?
Solo’d neck pickup on a Jazz is a pretty good punk tone. Buy one of those old Peavey Mk III amps and the accompanying 2 ohm 215 cab, and you will have a pretty stellar punk rig.
What does the P stand for in P bass?
Fender Precision Bass
The Fender Precision Bass (often shortened to “P-Bass”) is a model of electric bass manufactured by Fender Musical Instruments Corporation.
Is Fender P bass active or passive?
the classic p-bass sound is passive.
What bass does Flea play?
Modulus bass
Flea relies on his main Modulus bass for the majority of the set. It’s outfitted with a Modulus Lane Poor pickup, which is no longer in production, an Aguilar preamp, and a Leo Quan Badass bridge.
Why is there no bass in metal?
In general, Bass is difficult to hear in metal due to how it blends together with the guitars. Both the bass and the guitars tend to use distortion and deeper tunings. Metal bassists also usually play a similar part to that of the rhythm guitarist. This makes it difficult to hear the bass among the other instruments.
What is the best bass for rock?
The Fender Precision bass has been around for over 50 years, and has been used on more #1 hits than any other bass. It is a great fingerstyle funk and rock bass. The Fender Jazz bass is another classic, and has one of the best slap tones around.
Is a 4 or 5 string bass better?
A 4 string bass has a narrower neck, wider string spacing, and is easier to play. In comparison, a 5 string bass has an extra string allowing an extended lower range to play notes in lower keys and the choice of more scales, chords, and arpeggios but has a wider neck and a heavier instrument.
What are 5 string basses good for?
The biggest advantage of the five-string bass is its extended lower range. From the fretted low-E all the way down to the chest-imploding low-B, that fifth string provides a gateway for exploration into previously uncharted territory.
Should a beginner start with a 5 string bass?
If you’re a beginner , go with a four string bass guitar. They’re a lot easier to play, which means you’ll have a lot less frustrating learning process. Choose a bass guitar that is fretted, because playing a fretless bass guitar is incredibly challenging and isn’t suggested if you’re a beginner .
What bass did Jason Newsted use?
1981 Spector NS-2
Newsted has played up to 25 basses in all, including 6, 10 and 12-string bass which were used for specific parts. Primarily he used a 1981 Spector NS-2.
How many hours a day did Cliff Burton practice?
He practiced up to six hours per day (even after he joined Metallica). Along with classical and jazz, Burton’s other early influences varied from Southern rock and country to the blues.
Why did Cliff Burton play a Rickenbacker?
The first year Cliff was with Metallica he played a Rickenbacker guitar that he purchased in 1982. He loved his guitar, but he did not feel it was a strong enough instrument to withstand the rugged treatment of the daily rigors of heavy metal touring.
What amp settings are best for metal?
The Quick Answer
To achieve a good metal tone, have your amp settings on high for bass and gain, mid-low for the mids setting and mid-high for the treble setting. The key to achieving a good metal tone is high gain, high sustain and lot’s of low-end (bass). Remember, this is just a starting point.
Lorraine Wade is all about natural food. She loves to cook and bake, and she’s always experimenting with new recipes. Her friends and family are the lucky beneficiaries of her culinary skills! Lorraine also enjoys hiking and exploring nature. She’s a friendly person who loves to chat with others, and she’s always looking for ways to help out in her community.