Can I Get My Wahoo Kickr Service?

Wahoo has provided a self-repair kit you can get from support. Or, they’ll swap your KICKR out for you. Your choice.

What maintenance is required on a Wahoo Kickr?

Unplug the KICKR BIKE when stored or not in use, or power off by switch by plugging into a surge protector which supports this feature. Routinely check for signs of rust, corrosion, or excessive wear. Inspect all bolts and screws for rust or damage.

How long does a Wahoo Kickr last?

My Kickr Cores have each lasted between 9-12 months. Wahoo has done a reasonable public relations job by “replacing” the faulty trainers, but every replacement I’ve received was a used reconditioned trainer that they simply patched up and sent back out as a “warranty replacement”.

How much does it cost to tighten a Wahoo Kickr?

Tighten the roller against the bike’s tire to prevent tire slip. To set the correct roller tension against the tire, use your hand to hold the flywheel stationary and attempt to rotate the bicycle wheel with your other hand. Wahoo recommends 2 full turns. Aim for a spindown between 9-16 seconds.

How do I maintain my smart trainer?

3 Simple Tips for Maintaining Your Kinetic Trainer

1. Clean the roller. The roller is the Trainer component most likely to accumulate dirt and grime.
2. Lubricate. Keep your Trainer working smoothly and quietly by lubricating a few key points with standard chain lube.
3. Tighten.

Should I leave my Wahoo Kickr plugged in?

Yep it’s fine to leave them plugged in.

Do I need to calibrate my KICKR?

The KICKR and KICKR Core do require calibration in order to maintain that stated power accuracy. Wahoo’s documentation says: A spindown is recommended every 2 weeks or after transporting your KICKR to a new location.

Is a Wahoo Kickr worth it?

The Wahoo Kickr has consistently been one of the most reliable and user-friendly trainers available, earning several Editors’ Choice awards from our test editors. The newest version is even better than the previous model, which came out in 2018.

How much does it cost to tighten KICKR snaps?

Tighten the roller against the tire. The correct roller tension to avoid tire slip is typically found at 2 full rotations of the blue knob after the roller meets the tire. If you experience slip during use, increase the tension a quarter turn of the blue knob at a time and try again.

Is Wahoo Kickr bike the best?

If you are looking for one of the best indoor cycling trainers, the all-new Wahoo Fitness KICKR Bike should be on your list. It comes packed with some of the best technology and functionality to date and incorporates all of Wahoo Fitness indoor trainer expertise.

Is Wahoo coming out with a new KICKR?

Wahoo have just released their brand new KICKR ROLLR smart trainer, an all-new machine for indoor training and a great option for those who want convenience and a natural ride feel. Wahoo KICKR ROLLR at a glance: Classic roller feel with controlled resistance.

Can Wahoo Kickr get wet?

While a pain, take the bike off when you’re done and store the KICKR in a corner inside. They fold up pretty small. You can keep your bike under the tarp. It was designed to be outside and to get wet.

Can I use Wahoo Kickr without Internet?

The SYSTM app can be used without an internet connection, even for extended periods. Your workouts will be saved on your device until the internet connection is restored. At that time, the workouts will sync to the server.

Can you use Wahoo Kickr without Zwift?

You can use your Wahoo Kickr without Zwift. There are dozens of alternative cycling apps on the market like TrainerRoad and The Sufferfest. Most work with a paying subscription but there are some free apps such as GoldenCheetah and RGT cycling.

How accurate is power on Wahoo Kickr?

The Wahoo KICKR cycling trainer is a new direct-drive electromagnetically braked bike-trainer that allows cyclists to use their own bicycles as ergometer. It is purported to provide ±3% accuracy in power, despite costing considerably less than other cycling ergometers.

How do I factory reset my Kickr core?

Once your KICKR is saved to the Wahoo Fitness app, tap its entry on the LINKED SENSORS page. On the KICKR page, quickly tap the KICKR icon in the top left corner 10 times. Select Factory Spindown from the popup that appears, as shown below. Follow the instructions on the Factory Spindown page, as shown.

Why won’t my Kickr core perform Spindown?

Ensure that no other apps are connected in the background and that any previously paired devices (including the ELEMNT, BOLT, or other bike computers) are powered off or have Bluetooth connections disabled. Ensure you’re on the latest KICKR firmware and the Wahoo Fitness app is updated.

Why is my KICKR not connecting?

You may also need to restart your KICKR by unplugging it for 30 seconds. Also note that the KICKR should not connect in the Bluetooth settings menu directly; rather it should pair through a training app alone as described in the following instructions.

Why is my Wahoo Kickr noise?

The KICKR is designed to be relatively quiet, but it is normal to experience a hum or buzz and some vibration while riding, with the freehub naturally producing a “clicking” noise while coasting. Please note that you may experience additional noise and vibration during a spindown or pedaling at high speed.

Can I put a 12 speed cassette on a Wahoo Kickr?

Would a 12-speed cassette work on Wahoo Kickr? Wahoo Kickr has been designed for 8 to 11-speed cassettes. But you can install a 12-speed cassette on your Wahoo Kickr if you buy the correct freehub body. The Kickr XDR freehub body will allow 12-speed SRAM cassettes for instance.

What is the difference between Wahoo Kickr and Wahoo Kickr Core?

You’re in luck when it comes to the Wahoo ecosystem. The Climb, which simulates a climbing grade and the Headwind, Wahoo’s fan are both compatible with either unit. The only difference to consider is the Core will only allow the rider to climb up to 16% grade while the Kickr will allow you to climb a 20% grade.