Do Pro Skaters Ride Loose Trucks?

They all ride for different truck brands and have different methods for loosening them up, so you’ve got some options if you want to give it a try on your board (or you’ve got a bunch of new excuses to use when you can’t land a trick).

Is it better to skate loose or tight trucks?

Depending on the looseness of your trucks, you may want to tighten them up before tackling anything involving speed or impact. At High Speed, loose trucks become wobbly and are harder to control. By tightening your trucks, you’ll have better stability and you’ll reduce the likelihood of faceplanting on the concrete.

Is it harder to Ollie with loose trucks?

Loose trucks are harder to skate than tight trucks. There, I said it. That’s not to say that tight trucks are easier, or that loosening up the kingpin nut a few turns is going to make you lose all your tricks. I’m talking about skating them loose enough to wobble when you shake the board side to side.

How loose is too loose for trucks?

A good test to see if your trucks are too loose is to lean with your full weight on one side of the skateboard. If the wheel can touch your board, then your trucks are definitely too loose. Even if your wheel cannot touch your board, you might need to tighten your trucks to regain some stability.

How loose Should trucks be for street skating?

They should be loose enough that you will not struggle to move around obstructions while skateboarding. At the same time, they should not be too tight, or your bushings might burst at any moment.

What happens if your trucks are too small?

What Happens When Your Trucks Are Too Narrow. When you’re trucks don’t match your board and aren’t wide enough you’ll get the carpet riding effect. You won’t be able to see your wheels, just your deck. Just a tad too small doesn’t really matter but at a certain point, you’ll run into trouble.

What trucks do pro skaters use?

Many top-level pro skaters use Thunder trucks and the Hollow Lights II trucks in particular. What makes these trucks ideal for skateboarding is that they have a forged baseplate that adds impact resistance as well as hollow kingpins and axles to reduce the weight.

Is it easier to Ollie while moving?

Doing a stationary ollie is sometimes actually a lot easier than learning to ride a skateboard comfortably at speed, without doing much at all.

Should my skateboard be wobbly?

A wobbly skateboard isn’t a bad thing, some actually like to ride their trucks super loose. Beginners will have a harder time learning to ride a skateboard with loose trucks. After all, a more stable board will help you keep your balance. Just be sure to break bushings in and don’t tighten them until you squish them.

Do loose trucks cause speed wobbles?

CJ: For starters, speed wobs can be caused by a number of different reasons. A common one being loose trucks. Loose trucks can give you too much turning ability, making your set up hyper-responsive for any speed over 10-20mph. If you’re going faster than that, then you just might want to tighten your trucks.

Can you tighten trucks too much?

Know that truck tightness is a matter of personal preference. At the end of the day, there is no “perfect” amount to tighten your trucks. The tighter you turn the trucks, the more difficult the board is to turn.

Do tighter trucks help with tricks?

Tighter trucks enable you to hang your heel off the edge of the board – such as during a kickflip setup – without causing the board to veer off to the side. If you notice yourself struggling to stay online when you set up for flip tricks, try tightening your trucks.

Should you tighten new trucks?

Too loose trucks
If the trucks are too loose for you, you will wobble when you pick up some moderate speed. You should tighten your trucks. Be wary of going downhill if you feel you might be in this camp.

Are wheel bites normal?

Wheel bite happens when the wheels come in contact with the bottom of a skateboard deck. The wheels suddenly blocks and stops moving. This results in the skater losing balance and and even fall of the board. There are easy fixes for wheel bite and it’s actually quite common.

How tight should skate hardware be?

It’s ok if your hardware sticks out a little bit, but try to keep the extra length less than 1/4 of an inch. If your hardware doesn’t at least reach through to the top of the nut and doesn’t sink into the “Nylon Lock” part of the nut, then your hardware is too small and will fall off really quickly.

How long do skateboard trucks last?

Trucks usually can last between 2 and 5 years depending on the quality and how aggressive you skate. Replace your skateboard wheels when they have flat spots, tears, and are irregular shaped. Rotating your wheels and swapping them around will make them last longer.

Does skate truck Size Matter?

You want to match your skate truck width as close as you can to your deck width, usually within a . 25″ range for standard decks. Having too narrow of a truck may cause some instability issues and a teeter-totter effect, and having too wide of a truck will reduce your turning performance.

Do trucks matter on a skateboard?

Skateboard trucks are the most important part of your board, perhaps even are the heart and soul. Trucks have a huge impact on how your board feels and performs, they also last the longest.

What deck size do pros ride?

An 8’5” Skateboard Deck is the Pro-Choice
There is no doubt that almost all professionals have opted for the 8’5” deck in their important rides. Even though this size is supposed to have a weaker controllability compared to other small boards such as 8” or even 7’75”.

What trucks does Tony Hawk use?

Watch Tony Hawk Put His Indy Titanium 149 Trucks To The Test | The Berrics.

What pros ride low trucks?

Low trucks are generally for tech skating as the wheels sit closer to the board, creating a tighter center of gravity, making flip tricks a bit easier. You’ll want to ride smaller wheels, 48mm to 53mm, to avoid wheel bite. Low Trucks are better suited to ledge grinds and general ‘tech’ skatepark skating.