How Do You Reset Wahoo Elemnt?

If your ELEMNT gets into a state where it is completely unresponsive we do have a ‘hard’ reset sequence to restart the unit. If you hold the POWER button for approximately 10 secondsit should restart your unit.

How do I reset my Wahoo ELEMNT to factory settings?

Factory reset (option of last resort): accessible from the ELEMNT/BOLT’s Settings page, then System Info, this option restores all settings to factory defaults.

How do you reset a Wahoo watch?

In the unlikely event that your ELEMNT RIVAL is ever stuck, locked up, or frozen, simply restart the watch by holding down the power button for 15 seconds until it turns off, then restart.

How do I reset my Wahoo ELEMNT mini?

1. Power on the ELEMNT MINI.
2. Hold down both buttons for 1.5 seconds and release.
3. Select Forget Phone.

Why is my Wahoo ELEMNT not syncing?

Restart your phone, then turn on Bluetooth again via the settings menu. Navigate back to the settings menu on your ELEMNT as performed in step 2, then select “PAIR PHONE” to bring up the QR code. Scan the QR code on the ELEMNT screen to retry pairing.

How do you turn off Wahoo ELEMNT?

Though the device is normally powered off by holding the left-side power button down then selecting YES to confirm, in order to save battery the ELEMNT/BOLT/ROAM will also beep, flash the LEDs, and start a 10 second coundown timer to power off automatically after 15 minutes* of inactivity (by default) when not in a

How do I free up space on Wahoo ELEMNT?

For routes imported from a file or from history, start in the ELEMNT app under Choose a route in the Workout section and follow the steps below.

1. iOS: delete by taping the top right Edit button, then tap any eligible route(s) and select Delete.
2. Android: swipe left on an eligible route to remove it.

How do I setup my Wahoo watch?

Download the Wahoo ELEMNT app to your phone (I already had it since I’m a member of the Wahoo ELEMNT ecosystem with my ROAM bike computer). When the RIVAL is charged, turn it on and a QR code appears on the watch face. Scan the code to pair the watch with the phone (exactly how I paired my Roam with my phone).

How do I connect my Wahoo Elemnt to my phone?

Pairing to Android

1. Ensure Bluetooth^® and location services are enabled and open the ELEMNT Companion App for Android.
2. After the introduction video, tap Start to pair your ELEMNT/BOLT/ROAM to the app.
3. If prompted, enable access to the camera.
4. Select Pair when the dialogue box appears to complete the pairing process.

How do you set up a wahoo Elemnt bolt?

Pairing to Android

1. Ensure Bluetooth ^® and location services are enabled and open the ELEMNT Companion App for Android.
2. After the introduction video, tap Start to pair your ELEMNT to the app.
3. If prompted, enable access to the camera.
4. Select Pair when the dialogue box appears to complete the pairing process.

How do I connect my Wahoo Elemnt mini?

Pair your ELEMNT MINI with your smartphone by scanning the QR code displayed on the ELEMNT MINI by placing the ELEMNT MINI in front of your phone’s camera with the ELEMNT Companion App open (there will be a viewing window in the app). If prompted, grant the ELEMNT Companion App access to the camera.

How do I change the battery in my Wahoo ELEMNT?

Remove the battery cover and remove the flat battery for safe disposal. Replace with a new CR2450 battery, taking care to seat the battery correctly. Replace the battery cover, and secure with the screws.

How do I connect my Wahoo Elemnt to WiFi?

Wireless Networks (WiFi) Connect to UVA’s Unencrypted wahoo WiFi

1. Step 1: Connect Your Device to the UVA WiFi Setup WiFi Network.
2. Step 2: Register Your Device on the Network.
3. Step 3: Add wahoo to Your Device (Hidden Network)

How do I update my Wahoo?

On the workout page, a red dot appears on sensors requiring an update. Tap the blue box to open the sensor details. The sensor details page will then show the option to Update Firmware. Once the firmware is updated, a prompt appears to toggle Bluetooth off and back on.

How do I sync my Wahoo with GPS?

After the Wahoo ELEMNT app is paired with the device, you will need to authorize Ride with GPS to sync to your device:

1. Tap profile.
2. Go to Authorized Apps on iOS or Connected Apps on Android.
3. Select Ride with GPS.
4. Enter the email address and password that you use to sign into Ride with GPS.

Is the Wahoo Elemnt bolt waterproof?

Protected against short duration of water immersion. Max immersion for less than 30 minutes and at a depth of less than 1 meter. IPX-7, while water resistant, is still not recommended for swimmers, as a precaution.

How long can you pause Wahoo?

I contacted Wahoo support about this issue and got this response: “Thank you for contacting Wahoo Fitness. You can pause the ride and power off the Bolt, and, so long as is within 6 hours, when you power back on the Bolt the ride will resume.

Does Wahoo ELEMNT calculate Vo2 max?

They are seamlessly integrated together to cater even more functions. Additionally, the Wahoo has test indicators to record your Vo2 max and data related to it!

How much memory does Wahoo Elemnt have?

16GB of memory
This allows it to expand its mapping capability and to make exploring simpler with “millions of miles of roads and trails already preloaded,” according to Wahoo. The expanded memory allows much more of the world to be covered without having to delete and install maps when in WiFi range.

How do you delete history on Wahoo Elemnt bolt?

Daniel Kennedy

1. Turn on your ROAM and open the ELEMNT app.
2. In the ELEMNT app, navigate to the History screen and scroll to the ride in question.
3. Press and hold the ride until options pop up. Select “Delete & Resync”

What maps use Wahoo?

The maps of your device may be old because Wahoo did not release a newer version in the last years. OSM maps are constantly updated and with this program, the updated maps can be used on our Wahoo bike-computers.