HOW TO PAIR YOUR BLUE SC TO THE WAHOO FITNESS APP (ANDROID)
- Download the Wahoo Fitness app from the App Store.
- Open the Wahoo Fitness app.
- Wake up your Blue SC by rotating your rear wheel or crank arm until the magnet passes by the sensor.
- Select “Sensors” in the bottom left corner.
- Select “Add New Sensor.”
How do I connect my Wahoo Bluetooth?
For Wahoo Smart Trainers ensure you disconnecting the power for 30 seconds. In the Android system settings, go to the Apps section and tap the 3 dots in the top right corner to select “Show system” and find the “Bluetooth” or “Bluetooth Share” app.
Does Wahoo use Bluetooth?
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Wahoo SYSTM and Zwift, or paired to your bike computer.
Can’t connect to KICKR Bluetooth?
You may also need to restart your KICKR by unplugging it for 30 seconds. Also note that the KICKR should not connect in the Bluetooth settings menu directly; rather it should pair through a training app alone as described in the following instructions.
How do I connect my Wahoo Elemnt to my phone?
Pairing to Android
- Ensure Bluetooth® and location services are enabled and open the ELEMNT Companion App for Android.
- After the introduction video, tap Start to pair your ELEMNT/BOLT/ROAM to the app.
- If prompted, enable access to the camera.
- Select Pair when the dialogue box appears to complete the pairing process.
How do I connect my Wahoo Kickr to my phone?
Make sure your trainer is powered on and the blue and red LEDs are illuminated. On your Android device, turn on your Bluetooth, if it is not already. While standing next to your trainer, open the Wahoo Fitness app. Select the icon.
Android
- Select icon.
- When it loads, select your KICKR from the list.
- Follow the prompts.
Can you use Wahoo Kickr without WIFI?
You can just hop on your trainer and ride. In this case, you won’t have access to all the features, especially the ERG mode where the resistance of your bike is directly set up by the software to match a given value for your workout. Without connecting the Kickr to an app, your trainer will be in resistance mode.
How do I connect my Wahoo cadence sensor to my phone?
PAIRING TO THE WAHOO FITNESS APP (IOS)
- Download the Wahoo Fitness app from the App Store.
- Make sure Bluetooth is turned on and open the Wahoo Fitness app.
- Activate RPM Cadence by shaking it for a few seconds or spinning the crank.
- Select “Sensors” in the bottom left corner.
- Select “Add New Sensor”.
Can you use Wahoo Kickr without Internet?
The SYSTM app can be used without an internet connection, even for extended periods. Your workouts will be saved on your device until the internet connection is restored. At that time, the workouts will sync to the server.
Does Wahoo KICKR use Bluetooth?
ANDROID. The Wahoo KICKR is designed to work with the Wahoo Fitness app which supports most Bluetooth ® compliant Android devices running Android version 6.0 or newer. Note: Since Android devices vary widely, compatibility cannot be assured for all devices.
Why is my Wahoo cadence not connecting?
Turn off your phone. While it powers down, reset your sensor by removing the battery and reinserting it upside down for 10 seconds. Then reinsert the battery in the correct orientation and power your phone back on. Turn on Bluetooth again via the iOS Settings menu and open the Wahoo app.
How do you wake up Wahoo?
Open the Wahoo Fitness app. Make sure you have Bluetooth turned on. Wake up your TICKR by wearing it on your chest (or touching both buckle terminals). The TICKR wakes when heartbeats are detected.
Why is my KICKR not connecting to Zwift?
Unplug your bike trainer, wait for few seconds, and before you plug the trainer back in, open the pairing menu in Zwift and let it start searching, then plug your bike trainer back into a power supply. Wahoo KICKR/SNAP: Unpair your trainer from the Wahoo Fitness app.
How do I reset my Wahoo?
Forced reboot: Hold down the power button for 10 seconds to perform a forced reboot. e.g. Generally used if the screen becomes non-responsive.
How do I pair my Wahoo with GPS?
After the Wahoo ELEMNT app is paired with the device, you will need to authorize Ride with GPS to sync to your device:
- Tap profile.
- Go to Authorized Apps on iOS or Connected Apps on Android.
- Select Ride with GPS.
- Enter the email address and password that you use to sign into Ride with GPS.
Can two people use the same Wahoo?
Anyone know if you can have two different users on one subscription like you can on Fulgaz? My bf wants to use my Wattbike and he likes Sufferfest but if he uses my log in then his rides are then attributed to me! @armageddon1 No – only one user per account unfortunately.
How do I connect my Iphone to KICKR?
Ensure Bluetooth is enabled in your iOS settings and that your device is within 5 feet of KICKR BIKE, then follow these steps to pair:
- Open the Wahoo app and check that your KICKR BIKE is plugged in and powered on.
- Select LINKED SENSORS in the bottom section of the Workout page.
- Select Add New Sensor.
Does the Wahoo Kickr connect to WiFi?
Wahoo’s Direct Connect dongle lets you plug your Kickr into an ethernet port to bypass your wireless network. Of course, one requirement is to have a wired ethernet port that’s close enough to where you’re riding to plug the dongle into.
Should I turn off Wahoo Kickr?
I would advise keeping it unplugged when not riding. My Kickr Core died after an electric surge related to a lightning bolt, when my wife was using it. It is a quite sensitive device, since the switching power source was not damaged, but was not enough to let the surge pass through it towards the trainer’s electronics.
How does Wahoo Direct Connect work?
The Direct Connect pod actually plugs into a quick disconnect cable, which then plugs into your KICKR. This allows for (you guessed it) quick disconnects, including the accidental sort that happen when your spouse trips over the new ethernet cable running across the living room floor.
How do I reset my Wahoo cadence sensor?
Reset the Sensor –
- Remove the battery.
- Flip the battery upside down and reinstall.
- Leave battery installed upside down for 3 seconds.
- Remove the battery and reinstall correctly.
- Replace the battery cover.
Gerardo Gonzalez loves cooking. He became interested in it at a young age, and has been honing his skills ever since. He enjoys experimenting with new recipes, and is always looking for ways to improve his technique.
Gerardo’s friends and family are the lucky beneficiaries of his delicious cooking. They always enjoy trying out his latest creations, and often give him feedback on how he can make them even better. Gerardo takes their input to heart, and uses it to continue refining his culinary skills.