If you’re used to skating tight trucks, loosening them can improve the flow of your skateboarding. Without having to tic-tac up to an obstacle or lean drastically as you roll away, your skating will take on an easier, more care-free look. If your style seems rigid, try loosening your trucks.
Is it harder to Ollie with loose trucks?
Loose trucks are harder to skate than tight trucks. There, I said it. That’s not to say that tight trucks are easier, or that loosening up the kingpin nut a few turns is going to make you lose all your tricks. I’m talking about skating them loose enough to wobble when you shake the board side to side.
Should beginners have tight trucks?
Loose Vs Tight Trucks
When talking about skateboard truck tightness, keeping the truck tight is recommended for beginners because it is easier to handle the skateboard this way. Tighter trucks can also do greater ollies, since you have more control over your board.
How loose is too loose for trucks?
A good test to see if your trucks are too loose is to lean with your full weight on one side of the skateboard. If the wheel can touch your board, then your trucks are definitely too loose. Even if your wheel cannot touch your board, you might need to tighten your trucks to regain some stability.
What are the benefits of loose trucks?
Pros of Loose Trucks:
More Flow & Maniablity. Best Lock into Grind. Easy to Roll Away from Tricks. Easy to Balance Manuals and Grinds.
What trucks do pro skaters use?
Many top-level pro skaters use Thunder trucks and the Hollow Lights II trucks in particular. What makes these trucks ideal for skateboarding is that they have a forged baseplate that adds impact resistance as well as hollow kingpins and axles to reduce the weight.
Is it easier to Ollie while moving?
Doing a stationary ollie is sometimes actually a lot easier than learning to ride a skateboard comfortably at speed, without doing much at all.
Why is my skateboard so wobbly?
Wobbly skateboards are caused by bushings being too soft or the skateboard trucks being too loose. With just a few minor adjustments to the kingpin nut, you can solve this problem. It’s really easy to fix actually and some don’t even consider it a problem. Some people like loose trucks and others prefer them tight.
How do I make my skateboard easier?
Use a skate tool or other useful tool to tighten or loosen the big nut in the center of the truck.
- Turn it clockwise to tighten the trucks, getting tighter turning.
- Turn it counter-clockwise to loosen the trucks, getting a softer turning feel.
How tight should skate hardware be?
It’s ok if your hardware sticks out a little bit, but try to keep the extra length less than 1/4 of an inch. If your hardware doesn’t at least reach through to the top of the nut and doesn’t sink into the “Nylon Lock” part of the nut, then your hardware is too small and will fall off really quickly.
Why do skateboards squeak?
When you get friction in that spot from putting a lot of pressure on the baseplates by heavy turning, it can start to squeak. The best way to eliminate this annoying noise is by taking a few shavings of bar soap or wax and dropping them into the empty pivot cup (make sure you take your hanger out first).
How do you know if your truck is too tight?
In most situations, tight trucks are a hinderance. They inhibit your ability to turn and make it difficult to line up on an obstacle. If you often find yourself having to press down on the tail when turning, it’s probably time to loosen the kingpin nut.
Do loose trucks cause speed wobbles?
CJ: For starters, speed wobs can be caused by a number of different reasons. A common one being loose trucks. Loose trucks can give you too much turning ability, making your set up hyper-responsive for any speed over 10-20mph. If you’re going faster than that, then you just might want to tighten your trucks.
What deck size do pros ride?
An 8’5” Skateboard Deck is the Pro-Choice
There is no doubt that almost all professionals have opted for the 8’5” deck in their important rides. Even though this size is supposed to have a weaker controllability compared to other small boards such as 8” or even 7’75”.
Do riser pads give more pop?
They also have the added bonus of giving your board extra pop, since they add more distance between the tail and the ground. Another reason for skateboard riser pads is that they absorb some of the shock of impact, which can help keep your hardware from vibrating loose.
Why is an ollie so hard?
Unlike a soccer ball in mid-flight, a skateboard mid-ollie is being actively steered. This is exactly what makes doing an ollie so hard. It’s not enough to get the skateboard up into the air – you also have to steer it while it’s in the air. In fact, we can work out how you need to steer the skateboard.
Should you practice ollie on grass?
The two biggest parts to doing an ollie are getting the movements right and having confidence that you can do it. Start practicing on a soft surface such as grass or carpet. This will hold your board still as you practice, and won’t hurt as much as concrete if you fall off.
Why can’t I ollie high?
This can happen for a lot of reasons, but the biggest one is that you are not crouching low enough before your ollie, and not pulling your feet high enough after you jump. When you crouch down, try and touch the ground. When you jump, try to hit yourself in the chest with your knees.
Why does my new skateboard not go far?
“New wheels are not going to help in the least if your wheels aren’t spinning. Chances are you just have to clean and lubricate your bearings. Remove your wheel and pop out the bearings with the edge of your axle. Bones Bearings pretty much set the standard in the skateboarding world as far as bearings go.
What happens if roller skate wheels are too tight?
10 of 13: Keep the wheels relatively tight to preserve your skates. Too much movement will damage the axle. Some people like a lot of play in their wheels because they feel like it helps them turn and spin more easily.
How tight should roller skate wheels be for beginners?
Test the wheels to make sure the nuts aren’t too tight. Spin each wheel with your fingers. The wheel should spin freely. If the wheel doesn’t spin or is jerky when it spins, the nuts are to tight and need to be loosened.
Justin Shelton is a professional cook. He’s been in the industry for over 10 years, and he loves nothing more than creating delicious dishes for others to enjoy. Justin has worked in some of the best kitchens in the country, and he’s always looking for new challenges and ways to improve his craft. When he’s not cooking, Justin enjoys spending time with his wife and son. He loves exploring new restaurants and trying out different cuisines.